ACS Converters
-
Z-2 Base for direct programming of Z-5R or Matrix II K
Read moreZ-2 Base adapter allows you to transfer the keys base from a PC via a pin socket to the Z-5R and Matrix IIK controllers and back to the PC. It records the key base to the DS1996L for further transfer to Z-5R and Matrix II K controllers and then back to the key from the controllers memory.
-
Z-397 Guard converter USB- RS485
Read moreZ-397 Guard USB/RS-485 converter is designed for converting RS-485 interfaces to USB. Using the converter with terminal software speeds up and facilitates the diagnosis and launch of the RS-485 networks based on Iron Logic ACS network controllers.
-
Z-397 USB/RS422/485 galvanic isolation of the interface and PC
Read moreZ-397 Guard USB/RS-485 converter is designed for the conversion of RS-485/RS-422 interfaces to USB. Using the converter with terminal software speeds up and facilitates the diagnosis and launch of the RS-485/RS-422 networks based on Iron Logic ACS network controllers.
-
Z-397 Web Converter RS-485/Ethernet
Read moreNetwork converter Z-397 Web is designed for communication with devices connected on RS-485 lines, over a local network or Internet using TCP/IP protocols. The converter can work in several modes:
- Web mode. In this mode, the converter controls the access control system using a website (eg, guardsaas.com);
- TCP-server mode. In this mode, the converter waits for a connection from the PC with installed client software (eg Guard Light, Guard Commander, Strazh);
Manual