View as:
  • Epoxy rod

    Epoxy bars – an alternative to the industrial RFID glass flask. It is not always possible to apply predstavlyaetsya glass mark of the fragility of the material. Rod from polycarbonate filled epoxy material – robust housing for RFID toppings.

    Read more
  • Eurolock EHT, dd=0, silver, RS-485, USB, EM-Marine, HID Prox II, T5557, 125kHz

    The Eurolock EHT is the perfect solution for simply and cost effectively retrofitting existing door hardware with a modern access control solution.

    To open the door from the outside it is necessary to present the card. From the inside it is enough to simply push the handle inside the door. For installation it is an easy case of dismantling the old door handles and installing Eurolock EHT Net in their place with just two small holes per door leaf. Unique Eurolock EHT Net has the ability to be used on almost any existing door at a fraction of the cost of other more time consuming and complex solutions.

    Application of the Eurolock EHT Net allows you to create a flexible up to date access control and management system via an RS-485 network using specialised software and standalone management via a master card.

    Manual

    Read more
  • Glass bulb

    A typical example of the use of RFID glass bulb – a car Immobilizer, anti-theft tool for cars. All new vehicles are already equipped with this technology, which can reduce the number of thefts and burglaries. While a regular key can be copied, which is in transponder key can only be updated.

    Read more
  • Guard Net – controller +Dual-Lock +Fire / Intrusion al. +16 000 cards/events (light grey)

    The GUARD Net network controller is designed to work in a network or as a standalone access control system. This controller has changeable functionality, which is determined by the task specific firmware installed. A USB port allows you to configure the controller via a simple editing configuration file. Previous solutions required separate configurations for each type of controller. Now it is enough to provide GUARD Net and simply install the appropriate firmware required for the particular case.

    Manual

    Read more
  • IL-05E (num), EM-Marine, TK4100 clamshell card, WEG24, 125 kHz

    RFID Card EM Marine Clamshell 125Khz

    Technical specification:

    Chip type: EM-Marine Operating Frequency: 125KHz Card Type: Read only Print ID: yes, the format xxx, xxxxx Material: ABS Color: white, green, gray, blue Capability of printing: yes Operating temperature: -30 ° C … +55 ° C Storage temperature: -40 ° C … +75 ° C Dimensions (mm):86х54х1.6 Modification IL-05ELR – with almost twice longer working distnce

    Examples:

    Clamshell Card with slot standard EM Marine. The map shows the code, which greatly simplifies the entry in the database with no readers.

    Read more
  • IL-05ELR, EM-Marine, EM4200 long range clamshell card, WEG24, 125 kHz

    RFID EM Marine Clamshell Card 125Khz

    Advantages:

    + 50-70% Longer working distence
    Read more
  • IL-05M

    FID Card Mifare Clamshell 13.56MHz

    Advantages:

    + No copy possible
    + Encryption supported
    Read more
  • IL-05T, ATA5577 clamshell card, 125 kHz

    RFID Card T5557 Clamshell 125Khz

    Technical specification:

    Chip type: T5557
    Operating Frequency: 125KHz
    Card Type: Read / Write
    Print ID: no
    Material: ABS
    Color: white, green, gray, blue
    Capability of printing: yes
    Operating temperature: -30 ° C … +55 ° C
    Storage temperature: -40 ° C … +75 ° C
    Dimensions (mm):86х54х1.6

    Examples:

    This thick proximity card Clamshell with slot under the lace chip T5557. It is used for recording or copying a unique number. (Can simulate EM Marine, HID Prox II and other standards operating at a frequency of 100-150Khz). And as for the creation of systems using encryption algorithms in the map. (Hotels, temporary absences, etc.).

    Read more
  • IL-06E, EM-Marine, TK4100 ISO PVC card, 125 kHz

    RFID card EM Marine ISO 125Khz

    Technical specification:

    Chip type: EM-Marine
    Operating Frequency: 125KHz
    Card Type: Read only
    Print ID: yes, the format xxx, xxxxx
    Material: PVC
    Color: white
    Color printing: yes
    Operating temperature: -30 ° C … +75 ° C
    Storage temperature: -40 ° C … +85 ° C
    Dimensions (mm):86х54х0.76

    Examples:

    Card ISO (for printing on a printer) standard EM Marine. The map shows the code, which greatly simplifies the entry in the database with no readers.

    Read more
  • IL-06M

    RFID Card Mifare ISO 13.56MHz

    Advantages:

    + Impossible to make a copy
    + Encription supported
    Read more
  • IL-06M (num), Mifare, TKS50 ISO PVC card, 8H, 13,56 MHz

    RFID Card ISO with two chips EM Marine + Mifare 1K

    Advantages:

    + Two chips in one card
    Read more
  • IL-06M4, Mifare, MF1S70 ISO PVC card, 8H, 13,56 MHz

    RFID Card Mifare ISO 13.56MHz

    Advantages:

    + Impossible to make a copy
    + Encryption supported
    Read more
  • IL-06MUL

    RFID Card Mifare ISO 13.56MHz

    Advantages:

    + Impossible make a copy
    Read more
  • IL-06T, ATA5577 ISO PVC card, 125 kHz

    RFID Card T5557 ISO 125Khz

    Technical specification:

    Chip type: T5557
    Operating Frequency: 125KHz
    Card Type: Read / Write
    Print ID: no
    Material: PVC
    Color: white
    Color printing: yes
    Operating temperature: -30 ° C … +75 ° C
    Storage temperature: -40 ° C … +85 ° C
    Dimensions (mm):86х54х0.76

    Examples:

    It’s a fine ISO proximity card with chip T5557 (for printing on the printer.) It is used for recording or copying a unique number. (Can simulate EM Marine, HID Prox II and other standards operating at a frequency of 100-150Khz). And as for the creation of systems using encryption algorithms in the map. (Hotels, temporary absences, etc.). .

    Read more
  • IL-06U, Mifare Ultralight, TKS50 ISO PVC card, 13,56 MHz

    RFID Card ISO with Mifare Ultralight Chip

    Advantages:

    + Enchanced security protection, 100% cloning protection
    Read more
  • IL-07 MK

    Advantages:

    + Made of genuine leather
    + Impossible to clone
    + Supports encryption
    Read more
  • IL-07 TE

    Technical specification:

    Chip type: Temic
    Operating Frequency: 125KHz
    Card Type: Read / Write
    Print ID: no
    Material: PVC
    Color: white
    Color printing: yes
    Operating temperature: -30 ° C … +75 ° C
    Storage temperature: -40 ° C … +85 ° C
    Dimensions (mm):D30x0.76

    Examples:

    Can simulate EM Marine, HID Prox II and other standards operating at a frequency of 100-150Khz

    Read more
  • IL-07 TK

    RFID Lether Tag T5557

    Advantages:

    + Made of natural leather
    Read more
  • IL-07EBW, EM-Marine, TK4100 OEM key tag, WEG24, 125 kHz

    RFID Tag EM Marine 125Khz

    Technical specification:

    Chip type: EM-Marine
    Operating Frequency: 125KHz
    Type keychain: Read only
    Print ID: yes, the format xxx, xxxxx
    Material: ABS
    Capability of the logo
    Color (circle frame): white + green, white + blue, yellow + green, yellow + blue
    Operating temperature: -30 ° C … +50 ° C
    Storage temperature: -40 ° C … +75 ° C
    Dimensions (mm):37х30х3

    Examples:

    Bicolor Keychain proximity standard EM Marine. Small size, slim, attractive appearance, choice of body colors. Iron ring for attachment. Iron can be supplied carabiner. Code is applied on a keychain, which greatly simplifies basing without readers. Possible to put the logo.

    Read more

Showing 21–40 of 121 results