Showing 64–72 of 109 results
-
Matrix II ET reader for EM-Marine & T5557, Dallas TM (emulation of DS1990A), Wiegand 26, 125kHz – Anticlone Technology
Matrix II ET RFID reader is designed for using in the network and standalone access control systems. Matrix II ET reader supports EM Marine and Temic (T5557) 125KHz keys and connects to the controllers via iButton (1-Wire) or Wiegand-26 protocol.
Matrix II ET reader automatically deteñts keys standard for simultaneous using of EM Marine and Temic (T5557). There is a possibility of external control of visual and sound indication without additional connections.
-
Matrix II MF-I reader for Mifare, Dallas TM (emulation of DS1990A), Wiegand 26, 13,56 MHz – IronLogic Protected Technology (crypto)
Matrix II MF-I RFID reader is designed for using in the network and standalone access control systems. Matrix II MF-I reader supports Mifare 13.56MHz keys and connects to the controllers via iButton (1-Wire) or Wiegand-26 protocol. There is a possibility of external control of visual and sound indication without additional connections.
-
Matrix III 220 power management controller 220v with EM-Marine reader 125kHz
Matrix III 220 is a standalone network controller Energy Saving 220V with integrated reader EM-Marine. Matrix III 220 has a power relay with switching contact group. The controller is in the waterproof case, which is derived from the five wires: two for power products, three pins from the switching contact (galvanically isolated from the power supply). It comes with two interchangeable plastic Lining: pocket reader. All these features allow you to use the product in places where it is necessary to control the power supply: hotel rooms, dormitories, offices and houses adjoining, during repair work, etc.
-
Matrix III NET network controller with Mifare reader, Dallas TM (emulation of DS1990A), Wiegand 26, RS485, 13,56 MHz
Matrix III Net network controller-reader has three operational modes: 1. Card UID transfer; 2. Card UID transfer to authorise a given sector; 3. Card ID transfer of the authorised sector. If you are using connection via PC with an RS-485 network (eg using Z-397 Guard or Z-397 Web converters) you can build the systems based on Mifare Classic 1K (Mifare Classic 4K) cards, in which case the cards can be used as an electronic wallet.
-
Matrix IV RF Keeloq receiver 433,92 MHz, Dallas TM (emulation of DS1990A), Wiegand 26, RS485 – Anticlone Technology
Reader Matrix-IV RF is designed for use in access control systems (ACS) and via remote controls allows you to read numbers and transmit code at a frequency of 433 MHz on the iButton protocol, Wiegand 26 or RS-485 interface. The reader has two channels and any combination of the following options can be set for each channel of the reader:
- Type of the received remote controls: All / only IronLogic (AntiKlon) / not only IronLogic.
- Accepted keychains buttons: Any combination of buttons (eg 1 and 4, only 2, etc).
- Transfer button code with code remote control: On / Off.<!--
Manual
--> -
Matrix IV Wood
Type: Matrix IV Wood
Advantages:
An easy way to put your logo on the body of the client Case solid walnut Simultaneously supports two protocols (EM Marine, HID) Quick installation and connection Integration of network and stand-alone systems -
Matrix V 120
Reader 125КHz
Advantages:
Long range card reader (up to 120 cm.) Watertight enclosure and connectors Autotune Reading through the wall -
Matrix VI WiFi
Matrix VI Web network controller is designed for using in the online and offline access control systems. It's designed for management of the electromagnetic and electromechanical locks, turnstiles (2 x Matrix VI Web controllers required) and easy to install and maintain.
Matrix VI Web can be connected to LAN network using Wi-Fi connection, RS-485 network, directly to PC via USB port using Z-397 Guard USB/RS-485 (Z-397 Guard USB/RS-485/RS-422) converter, to wired Ethernet/Internet network (when Wi-Fi connection is unavailable) using Z-397 Web converter. This makes it possible to build a complete network access control system with a time tracking, event control and reports with our cloud access control solution.
-
Matrix-II EH reader for EM-Marine & HID PROX II, Dallas TM (emulation of DS1990A), Wiegand 26, 125kHz
Matrix II EH RFID reader is designed for using in the network and standalone access control systems. Matrix II EH reader supports EM Marine and HID ProxCard II 125KHz keys and connects to the controllers via iButton (1-Wire) or Wiegand-26 protocol.
Matrix II EH reader automatically detects keys standard for simultaneous using of EM Marine and HID ProxCard II keys. There is a possibility of external control of visual and sound indication without additional connections.
Manual
