Guard Net – controller +Dual-Lock +Fire / Intrusion al. +16 000 cards/events (light grey)

The GUARD Net network controller is designed to work in a network or as a standalone access control system. This controller has changeable functionality, which is determined by the task specific firmware installed. A USB port allows you to configure the controller via a simple editing configuration file. Previous solutions required separate configurations for each type of controller. Now it is enough to provide GUARD Net and simply install the appropriate firmware required for the particular case.

Manual

Compare
SKU: 3751 Category:

Description

Detailed instructions, as well as the minimum conductors at the terminals provide for ease of installation and maintenance. Due to its three actuators (relays and two field-effect transistors), the controller is ideal for controlling electromagnetic and electromechanical locks, turnstiles and barriers. Also, in some configurations, it can be provided to connect an activator lock, i.e. requiring the supply of different voltage polarity for opening and closing.

Having separate terminals for fire signalling increases fire safety as well as switching into an active state enables unlocking of passages regardless of communication with the computer.

It has a second RS-485 port implemented within the controller as a galvanically isolated repeater RS-485 line. Thus, the long chain may be built as short multiple electrically isolated segments. This greatly improves the interference protection and yet the software accepts all the devices as if they were connected to the same RS-485 line.

Additional information

Dimensions 150 x 150 x 30 mm
Purpose

Lock, Turnstile, Barrier

Controller type

Network

Connection types

RS-485

RS-485 lines count

2

RS-485 connection speed

19200 Kbps, 57600 Kbps

RS-485 maximum line length (m)

Keys count

2 x 8168

Types of recordable keys

Normal, Master

Events count

8192

External readers count

1-8

External readers protocol

iButton (1-Wire), Wiegand-26

Operation modes (basic)

Normal, Blocking, Free, Wait

Operation modes (advanced)

Accept, Trigger, Evacuation, Anti-Theft, Secure, Gateway

Access point types

Door, Gateway, Turnstile, Activator Lock (Gate)

Actuator types

Electromagnetic, Electromechanical, Turnstile

Additional power output for external readers

Yes

USB operational mode

Host

Non-volatile memory (EEPROM)

Yes

Voltage

9-16V DC

Current consumption (mA)

100

Bleeper

Buzzer

Visual indication

19 x LED

Relay outputs count

2

Relay outputs maximum current (A)

25 (Type C)

MIS transistors count

1

MIS transistors maximum current (A)

5

Fire alarm input

Yes

Security alarm input

Yes

Operating temperature (C)

+5…+40

Case material

ABS polymer